Prosthesis are custom fabricated high definition
silicone cosmesis are now available with us. We now offers custom
fabricated cosmetic fingers / partial hand prosthesis as well as
lower limbs.
All our cosmetic restorations are custom fabricated from a plan
duplicate of the patient's stump to achieve proper proportions. Each
cosmetic is sculpted to meet individual requirements and has an
extra ordinarily realistic appearance and feel.
Our procedure require three dimensional impression of the entire
surface of both affected and contralateral sides. Our fabrication
technique involves coloring the silicone material itself prior to
sculpting, as opposed to surface painting. This process allows the
layering of different shades of silicone to provide translucent
finish to the cosmesis similar to real human tissue.
In India, 220,000 people live with a upper and or lower limb
amputation, and 28,000 amputations are performed each year.
Amputation is not a disease, but it can be the consequence of a
disease.
Upper and or Lower limb amputations are carried
out for a variety of reasons, including vascular disorders,
consequences of injury, malignant tumours, infections, congenital
deformities and accidents. However, the vast majority (80 percent)
can be attributed to circulatory disorders of the arteries.
Accompanying conditions such as diabetes mellitus and high blood
pressure, and such factors as nicotine abuse, overweight and age
also play a role. Our medi prosthetic modular components help give
patients back as much mobility as possible and increase their
quality of life.
Artificial Limbs and prosthesis products are professionally
designed according to the requirements of patients. For the first
time our products are available directly with in the reach of the
patients. We have appliance to suit the need for every common injury
and disease of musculo-skeletal system. We are specialized in spinal
brace during the last two years. We have fitted more than hundreds
halos. Our products are reasonable cost effective and well designed.
After along R&D we have developed a new design of Halo Vest & Halo
Pelvic apparatuses.
We have availability of prosthesis with;
- mechanic functions
- Locking device and mechanic function
- Pneumatic functions
- High performance pneumatic functions
- Hydraulic functions
We perform complete tailor - make fitting as well as in house physio
rehab of our wide range of products to suit individual needs.
A word about lower limb prosthesis:-
About Rehabilitation:
Many people who undergo amputation are initially concerned with
the physical and emotional trauma of the surgery and the
attendant flurry of medical procedures. Concerns about pain,
recovery and adjustment rapidly give way to practical questions
about how to get around at home, how to get back to work, how
does a prosthetic limb really function and indeed what does it
look like.
About the Clinic:
The members of the rehabilitation team are professionals in their
specific area and patient will find that they are happy to
answer questions regarding your treatment and to provide patient
with information including details of support groups and special
interest topics. A valuable part of the rehabilitation process
is the interaction with other amputees and their families. The
firsthand experiences of established amputees can provide not
only understanding and support, but a wealth of tips on living
with your prosthesis. This is also a good time for your family
or carer to talk through some of the issues of concern to them.
About the role of Doctor:
Patient will be assessed first by a doctor, specialised
in rehabilitation, who will note details of patient medical
history, current medical needs and impairment status: i.e.
position of amputation and condition of the stump (residual
limb). The doctor will also be interested in patient lifestyle
and expectations so that the choice of prosthetic treatment and
rehabilitation can be assessed accordingly.
About role of Prosthetist :
The prosthetist is trained in the design, fabrication and fitting
of artificial limbs (prostheses). He/she will be interested in
the condition of patient stump, patient general fitness and
patient prosthetic requirements so that preparation of patient
first prosthesis can begin. The working relationship and
communication between patient and patient prosthetist is
important as patient will be involved with them on a long term
basis for prosthetic care and maintenance, necessary adjustments
and future prostheses as required.
About role of Physiotherapist:
The physiotherapist will co-ordinate patient early limb
care and mobility programme and will teach patient how to walk
on his/her new prosthesis (gait training). Patient will most
probably have started treatment with a physiotherapist very soon
after surgery when patient will have been instructed in suitable
joint and body positioning so as to maintain good range of limb
movement.
About role of Occupational
Therapist: The role of the occupational
therapist is to ensure that patient is suitably prepared for
back home and, if applicable, work environment. This may entail
visits to patient home for assessment purposes as patient may
need some additional equipment to assist him/her with mobility
and safety around the house. If this is not possible especially
in foreign patient cases then it is better to bring video
footage of home environment or pics. of interior and exteriors
of various rooms of patient home. If patient will be using
an upper limb prosthesis then the occupational therapist will
train patient in efficient use of the prosthesis.
About role of Nurse:
The nurse will check patient personal details including blood
pressure and weight and will ensure that any limb dressings
patient may be using are satisfactory. If patient have a medical
condition which requires regular treatment such as diabetes,
then be sure to tell the nurse so that treatment is not
forgotten whilst at the clinic.
A word about our Prosthetic
Programme
Walking: Gait is the
term used to describe the process of walking. It comprises two
basic phases:
Stance Phase -
The period from heel strike to mid stance and through to toe off,
when the body weight is supported on the leg. In stance phase
the prosthesis will be expected to support the entire body
weight and if one is walking quickly, momentum will increase
these forces to well above body weight. As an example if the
user weighs 65 kg. (~143 lb) then, as the speed of walking and
therefore momentum increases, the weight going through the
prosthesis could be as much as 104 kg. (~229 lb).
The components which make up a prosthesis must be strong enough to
withstand the frequent application of very high loads which one
would expect to occur in normal walking, and yet have the
ability to cushion impact so as to reduce jarring.
Component weight is an important factor in the design of a
prosthesis since the use of lighter components will normally
require less energy expenditure for mobility. Modern prosthetic
components take advantage of a number of materials developed for
the space industry such as: carbon fiber, which has a high
strength to weight ratio, and polymers, which can be manipulated
to give a variety of properties from cushioning to flexibility
in structures.
Where possible, components which go into building a prosthesis
will be designed to function without expending excess user
energy and to return energy when required, such as an element of
push off as the prosthetic toe leaves the ground.
To maintain the knee joint in a stable position during weight
bearing, prostheses for trans-femoral level and higher may
contain a braking device which provides some stabilization to
prevent the knee flexing whilst body weight is being supported
during early stance. These units are weight activated and will
allow the knee to bend when the weight is off the limb.
Swing Phase -
The period from toe-off, when the knee flexes to allow the foot to
clear the ground and accelerate forward, to when the heel
strikes the ground for the next step. The muscles that mobilise
the knee normally assist this function. The time for the swing
phase should ideally speed up as walking speed increases
otherwise the limb swings in slow arcs like a pendulum and
results in an uneven cadence. Prosthetic knee units often
contain a device which controls the swing phase period so that
the prosthesis will respond to different walking or running
speeds. These units may be electronically controlled pneumatic
or hydraulic devices that are programmed optimally for each
individual.
Reconstructing
the human faces by Tissue - Integrated Prosthesis are also handled
by us.
Case 1
A young man underwent surgical excision of a malignant
melanoma that necessitated removal of his external ear. The defect
was covered with a split-thickness skin graft. During the procedure,
two implants were placed in the mastoid process, and
skin-penetrating abutments were connected. After healing, a bar
construction was attached to the abutments, and the silicone
prosthesis was fabricated. The total time from surgical excision of
the tumor to complete rehabilitation was 3 months. One advantage
with the implant-retained prosthesis in such a patient is that any
local recurrence will be readily detected.
Case 2
A mid aged woman had an orbital defect after surgical resection
of a malignant tumor. Implants were placed in the bone, and
low-profile skin-penetrating abutments were connected to support the
prosthesis. Because the available space was limited, retention with
magnets was chosen for this patient.
Case 3
An elderly man in poor general health had a
carcinoma of his nose surgically resected with use of local
anesthesia, during which a single implant was placed for prosthesis
retention. Three months after the resection, an abutment, with
magnet for the support, was attached to the implant, and a nose
prosthesis was fabricated. For such a patient living a quiet life,
this retention proved to be satisfactory. In more active patients,
other retention arrangements probably would be used.
Under Orthotic (Lower) wide range of
products we have are:
- Functional hip joint Orthosis with rage of
motion.
- Functional Knee Orthosis for osteoarthritis
- Universal Knee splint with flexion-/extension limitation
and options for
immobilization
- Lower leg orthosis designed for early functional
mobilization, restricted flexio /
extension
- Ankle Immobilizer
- ANKLE Foot Orthosis Shoe Insert
- Knee Immobilizer
- OA-Brace for Arthritis Patient
Under Orthotic (Upper) wide range of
products we have are:
- Shoulder Abduction Splint
- Wrist support
- Elbow support with silicone cushion
- Range of motion elbow orthosis
Under spinal braces we have wide range of
products:
- Soft Collar
- Taylors Brace - Dorso - Lumbo Sacral Brace
- Delhite Collar - Philadelphia Collar Type
- Taylor`s Brace - Dorso - Lumbo Sacro Brace
- Delhite Collar
- Dyanamic - Ash Brace, Dash Brace
- Four Post - Collar Plastic Occipital Support
- Dash Brace
- Sleek Lumber Corset
- Pinless Halo Vest
- S.O.M.I. Brace
The new medipro® DynaWalk feet
are suitable for users with low walking speeds and a higher need for
safety as well as those with higher levels of mobility depending on
the version.
In addition to their functionality, medipro® DynaWalk
feet are marked by a physiological foot form and natural foot shell
with a seperate big toe. medipro® DynaWalk feet
are splash proof, and the versions M2LP and M3LP are approved to a
maximum body weight of 136 kg.
Under Orthotic
Foot care wide range of products we have are:
- Silicon Toe Spreader Sizes : Small/Large
- Silicon Full Insoles Sizes : Small/Large, Large/Extra Large
- Silicon 3/16" Wedging
Used : For
1. Osteoarthrtis
2. Flat Foot
3. Club Foot
Sizes : Child/Adult
- Silicon Heel Pads Sizes : Male / Female
The medipro®flex carbon feet are suitable
for users with all walking speeds and real "powerhouses".
Higher stability, lower weight and elastic
return force – due to the design – allow leg amputees to save energy
when walking and offer a virtually physiological gait. As there are
no screw connections in the forefoot lever, no irritating noises are
produced when walking and there is no “neutral point” on roll-off.
The continuous spring action without any mechanical interruption
eases transition from the stance to the swing phase and makes the
gait more dynamic and rhythmic as well as stronger and safer.
Dynamically robust power packs medipro®flex feet
absorb shock, and store and return energy. Users of mobility class 2
to 4 up to a body weight of 166 kg – depending on foot type – can
benefit from the new technology.
Features such as the rounded toe front and the
continuously segmented construction provide more physiological and
smoother roll-off properties, better mobility and therefore safer
walking – even on uneven ground.
The proximal pyramid adapter on the foot makes
it easier for the orthopaedic technician to adjust the prosthesis,
so simplifying optimum adaptation to each user's needs.
Many user's wish to be able to wear shoes with
different heel heights after leg amputation. The medipro®flex
E foot allows this uncomplicated adjustment. Simply by releasing
a metal button the foot can be adjusted to a heel height of 0-5 cm.
There is no longer much of a problem with any of the season's
fashions from going barefoot to wearing high-leg shoes - even
without changing the static structure of the prosthesis.
Under Upper
Prosthetic we have wide range of silicon with matching body color
products:
- We help patients with
Osteointegration (complete ear flaps replacement)
- We help patients undergone nose removal with aesthetic nose
replacements
medipro® Knee joints
Correct selection of the individual functional components of
the prosthesis will meetthe individual requirements of each user.A
wide variety of versions of themedipro® knee joint
has therefore been created to take account of specific user
requirements. medipro® knee joints have a stable
aluminum framework construction and low weight, giving optimum
suitability for individual prosthesis provision.
An example of a knee joint that ensures a high
level of safety, developed specifically for wearers with this
requirement, is the medipro® OFM2 Safety knee Joint.
Users in the higher weight classes can also be fitted with
medipro® knee joints.
The medipro® OH6, for example, is
used for those with a weight of up to 136 kg and tolerates increased
loading due to the high functional requirement.
medipro®
Hip joint
Development of the medipro® HM3 hip joint combined
functionally with the ESSA carbon system represents a milestone in
the care of this user group. The complex composition of the hip
disarticulation prosthesis stores sufficient energy at each step to
assist the rollover process of the prosthetic leg in a physiological
manner.
Under Lower Prosthetic we have wide
range of products:
- Hip Disarticulation Prosthesis
- Flex Carban Foot
- Above-knee Prosthesis
- Knee Disarticulartion Prosthesis
- Below Knee Prosthesis
The loss of extremities represents not only a physical defect
for those concerned but also a mental and social challenge.
In addition to the functional replacement of the lost leg by
individually selected prostheses, cosmetic covering plays a
particularly major role. The medipro® cosmetic foam
cover ca be used for functional covering of both below-knee and
above-knee prostheses.
The soft, skin-coloured medipro®
cosmetic stockings, made in tough quality micro-fibre with a
silicone top band for a secure hold, provide the finishing touch.
Under amputation cases we have wide range of
silicon products:
- Amputee Finger replacement
- Female and Male Hands replacement with wide range of mobility
options
- Passive hand replacements
Please note:-
|